Ultimate Hand Guard Yamaha Tenere 700
Try our bestselling Ultimate Hand Guard, made from high-quality machined 6061 aluminum and plastic covers in multiple colors for your dirt bike, so you can protect your hands and look awesome at the same time.
As an option, you can also add foldable mirrors.
*NOTE: In order to fit the Hand Guards you need a 28mm (1.125″) Aluminum FatBar (Adventure Bike) (Installation requires REMOVAL OF BAR ENDS)
*ANTI VIBE AVAILABLE, BUY HERE
Price
$200.00
Add-on Products
Description
Set Includes:
- 1 HDB Top Clamp (stock size)
- 2 HDB Ultimate Handguards™,
- 1 Pair of Swivels,
- 1 Pair of Plastic Shields,
- 2 – Big Bolts,
- 1 – 5/8-11 tap,
- 4 – 8mm x 35mm SHCS,
- 2 – 8mm x 30mm BHCS w/ washers,
- 2 – 8mm x 20mm BHCS w/ washers,
- 2 – 8mm x 40mm FHCS,
- 4 – 5mm x 16mm BHCS w/ washers,
For more info, check out this forum link: Tenere700
Additional information
| Weight | 2.5 kg |
|---|---|
| Dimensions | 45 × 22 × 10 cm |
| Color | Black, Green, Grey, Husky Blue, Orange, Red, White, Yamaha Blue, Yellow |
Rob –
Sturdy, well made, and look good. Fit was great. Install was easy. I had to trim a little off my throttle tube for it to move freely but that was easy to do with a box knife.
Ezra (verified owner) –
These are the best handgaurds out there. Very well built, fit is great for the T7. No extra vibration with removal of the removal of the weights. Install was easy and straight forward. I am running ProTaper steering damper low bars currently. I had to tap my bar ends but that was about a 20min job at max. Only thing negative to say is they cost a bit more then average and I wish they came anodized. With that said you pay for what you get and these are top quality made is the USA. I am always willing to pay more for made in USA products.
Brennan –
Excellent fit and quality. HBD worked with me to get a great setup before they had a full kit for the T7, and I couldn’t be happier. And get the mirrors! They are dead steady and really nice to fold in when needed.
Chad Wadsworth –
We are happy to hear you are satisficed..
John –
Barkbusters were already installed on my T7 when I bought it used. The BB bar clamp design interfered at full lock with the Acerbis 23 liter tank I installed, so I looked for an alternative. The HDB design eliminates any bar interference issues, and it took longer to remove the BBs than it took to install the HDB kit. Very impressed with how stout the HDB Ultimate guards are, and no doubt they will hold up better than the BBs in a hard fall.